Cisco DataCenter

In my C210 M2 Server under the summary of the fault, I have a critical alert that says "Material-inoperable" CATER_N: A catastrophic fault occurred one of the processors. Any suggestions on this error code I should open a TAC case?

I saw some of my clients who want to go to the new version of UCS 3.1 (1e). Does anyone have comments on this subject, what I should look for to do this upgrade?

Hello We are installing a new Mini UCS and the difficulty in trying to solve the error message attached. He seems to have a certain type of certificate error that needs to be repaired? Thank you ucs_error.jpg

Dear all, I configured the UCS chassis with 5 blades and installed the esxi on all five blades... I created a VNIC 10 per server and by now I have ip for esxi management by combining two NICs for and YEW is connected to the switch catalyst 2960. The

Hi all I would like to know if I can install Suse directly on a Cisco UCS 220 M? Thank you. 424

Hi all I would like to know if I can install Suse directly on a Cisco UCS 220 M? Thank you. 477

For UCS, we have a fabric interconnect version 2.1, customer bought a FI more to add to the cluster configuration. The FI is delivered with the latest firmware, please let me know can downgrade us the new FI and forms a cluster or the upgrade of FI e

How many of you have a UCS with production systems and DMZ on it (same blade as well)? The question came at work several times. I, being more concentrated, the security about had a cow. But I want to know what others are doing and how you are assured

Hi all We have a doubt about the normal migration of Esxi to Cisco Custom Esxi, Could you help us please? The procedure looks like a normal esxi update? We would be able to deploy windows and other OS VM in the Cisco Custom Esxi? Thanks a lot for you

Hello I need to confirm what is the name WWN should we use primary and secondary targets during the SAN configuration when you configure startup strategy. I think that this should be the WWN of SAN storage controllers So what needs to be configured h

Hello What is the 4 GB USB Flash in UCS B200M3 server is for? Thank you

We are faced with the issue of the continuous reboot on the domain controller after the upgrade of the enic, firmware and update driver fnic upgrade of 2.1 2 a to d 2.2 6.

Hello experts Guy What is the root cause of below and how to start the process of diagnosis and how to solve it, give me streams 101 chassis showed "unusable condition". Thank you all

I want to know the known issues and resolution here while improving a 2, 2.1 to 2.2 6 d.

Hello In a new installation. For the creation of service profile I have to ask the customer what operating system and the application will be installed on each server Then there is for each operating system and application best practices on Cisco? Or

Hello I have a question about UCS 6300 Series fabric interconnects. Is this fabric UCS interconnections 6300 series integrated into the extension of tissue function?  The reason why I asked this question was, when there is 6300 series fabric has been

Hi people, Cisco Nexus 2348UPQ has 24 to 10 GB uplink interfaces. Supposedly on the distribution layer, we have a pair of Cisco Nexus 5548UP, how many ports we can group about 2348 for vPC for double-homing links. Thank you very much!!!

When the implementation of frames must be end to end I've heard mixed in this area results.

Do you need multiple boot LUN on the storage array for each host that you want to apply the service profile to? I'm just confused, let's say I have 12 blades that I want to designate as boot SAN for ESXi, y aura-t 12 profiles of separate service for

Hi all I did an upgrade of the UCS system. I moved from 2.0 to the latest news. While performing the upgrade, everything seemed ok, but after that whole process is finished, the two 6248UP FI won't come. LEDs seems to be ok, but the console port not